If you landed on this page it means you’re looking after how to get rid of the write protection that all of the autodesk usb sticks ship with.
This article covers, specifically, the 32GB stick from 2015 (or maybe 2014).


I spent over 3 hours in order to get this solved and I got it worst: after using the formatter SilliconPower.exe tool, my stick got messed up, rendering it useless to the point that even though it was detected upon plugging it in, it always gave me the message ‘drive has no media’ whenever I tried to repair, format, wipe or even create/delete partitions.

Anyway, if this is what you are after, download this. It contains MPALL v3.63.0C-DL17 which was the only version that properly detected this USB Stick (I tried, 5 or 6 different versions till I got to this one). I managed to get a hold of this version while searching through and landed on this page: http://repusb.cubava.cu/?page_id=140&cpage=4

I’m sure you’ll find MPALL versions that suit your usb stick in case yours is a different version than the one I got.

Regarding this stick, this is the most important information you must know:

Chip model / IC Version: PS2251-03
Burner: BN03V104.BIN
Firmware: FW03FF01V10010M.BIN

 

Download MPALL v3.63.0C-DL17-stevesmind
Within this file you have everything including:
Burner file
Firmware file
MP.ini configured for the Autodesk 32GB usb stick
MPALL 3.63.0C-DL17 out of the box (I decided to include this as while using MPALL 3.29 I noticed the application stopped working so including it just in case)

I hope this is helpful to someone out there. If it is, leave a comment. Would love to know this was valuable to someone.